Metal Tile Co manufactures quality stainless steel and metal products including stainless steel tiles and backsplashes
(888) 908-2736 | FAQs | My Account | View Cart |       
 
Stainless Steel and Other Metal Wall Tiles Tile Calculator Wall Plates Custom Sizes Backing Types Material Information Installation Items Stainless Steel Tiles
   Home  >  Store  >  Custom Solid Sheet Backsplashes  >  CCSSBSPL20
Categories
Resellers
Return Policy
Terms & Conditions
Installation Instructions
 
Custom Cut 20 ga. (0.04 in.) 304 Stainless Steel Sheet Backsplash (non-magnetic)
Please Note: All dimensions must be entered in inches in decimal format. Any dimension less than 1 must be preceded by a 0. E.g., 3/4 would be entered as 0.75.


20 ga. (0.04 in.) 304 Stainless Steel Sheet Backsplash #4 Brushed (Satin) Finish (non-magnetic)

Please specify the height and width of the backsplash that you would like custom fabricated.

Grain Illustration: Grain will be along the length dimension unless specified otherwise



Please note that custom items are non-returnable.


A sketch must be provided for custom cutouts and costs $20 per cutout.

Also note that the maximum width or length that we will ship is 46 in. If you are intrested in sizes greater than 46 in., please contact us.

Installation
Use PL Polyurethane Premium Construction Adhesive to adhere the backsplash to the substrate (which can be drywall, etc.). You may want to use double sided tape in remote spots to temporarily hold the backsplash in place while the adhesive sets. You are able to cover the right and left vertical edges with our 48 in. x 1 in. standard trim. You can also cover the edges with our stainless steel cap strip sold in 42 in. lengths or custom lengths. If you are butting multiple stainless steel panels, the divider strip is used to join the panels. Please see our trim category. You must subtract 3/32 in. (0.09375 in) from the dimension that you measure for each cap trim or divider trim you decide to use. Thus, if you elect to use the cap trim on both sides or cap trim and divider trim or any combination of trims subtract 3/16 in. (0.1875 in) from the width dimension that you measure to compensate for the thickness of the two trim pieces.


 
Price:  $0.08
per sq. in.
($11.52 psf)
Available Options:
Length (in.)
Width (in.)
Price
Quantity: 
 Optional Related Products 
Edging Trim For a Single Edge of a Sheet Backsplash
 Edging Trim For a Single Edge of a Sheet Backsplash
$0.48
Edging Trim for Butted Edges of a Sheeted Backsplash
 Edging Trim for Butted Edges of a Sheeted Backsplash
$0.55
10.2 oz. Loctite® PL Premium® Polyurethane Construction Adhesive
 10.2 oz. Loctite® PL Premium® Polyurethane Construction Adhesive
$6.50
Stainless Steel Cleaner - Oil Based
 Stainless Steel Cleaner - Oil Based
$8.19
Stainless Steel Cleaner - Water Based
 Stainless Steel Cleaner - Water Based
$7.59

©2024 Metal Tile Co About Us Contact Us Terms & Conditions International Customers
Stainless Steel Tiles Copper Tiles Brass Tiles Aluminum Tiles Bronze Tiles
Stainless Steel Trim Wall Plates Stucco Tiles Photo Gallery Metal Tiles
Stainless Steel Backsplash Backing Types Installation Video Installation Guide Sitemap
Acceptance Mark
ALL PRODUCTS ARE MADE IN THE USA
All Prices are in U.S. Dollars
Prices are per tile